Dive Rite Surface Marker Buoy

Dive Rite Surface Marker Buoy


Rebreather divers and open circuit divers alike will appreciate our Dive Rite SMT Hybrid – Surface Marker Tube. An oral/power inflator makes inflation simple for rebreather divers who do not have easy access to a regulator for inflation. Likewise, a funnel-shaped, anti-spill baffle allows open circuit divers to inflate this SMT with a regulator. A standard over pressurization valve allows excess gas to vent during ascent and/or to depressurize the bag at the surface. Built-in carrying sleeve. ANSI safety orange. Made in the U.S.A.

Which colour ? – Orange is for normal use but technical divers use Yellow as an emergency marker. Most divers should order orange to avoid confusion from the dive operator.
•30 lbs lift
•5-feet x 8-inches (1.5m x 20cm)
•Reflective tape on both sides for added visibility
•300 D polyester bag is extra-tough and more resistant to fading
•Durable water repellant finish (DWR) inhibits water saturation and dries quickly
•RF welded seams with nylon reinforced edges
•304 stainless steel D-ring lift point
•Over pressure relief valve
•Funnel-shaped baffle
•ANSI-certified safety orange
•0.8lb (363g)

Additional information


Dive Rite